More Innovations Coming


News

News

2017/09/05

eSUN modified resin filament eASA is ready for you to try!

 Filaments with reliable quality and environment-friendly feature are people's first choice. For instance, filaments with metallic powders can print metallic prints; with photosensitive resin is perfect for jewelry and dentistry.

 

 

  As a professional filament manufacturer, eSUN have a rich range of 3D filaments. Recently we've released eABS Max, a much welcomed tougher filament that adds flame retardant efficient performance to ABS+. This time we developed a modified resin filament eASA, one that's similar to ABS structurally.    

About eASA

  eASA is an impact modified resin composed of acrylonitrile, styrene and acrylic rubber.

 

 

Product feature

  With a similarity in structure, eASA has excellent mechanical physical property as engineering plastics. Because the butadiene with double bond is replaced, eASA is given outstanding weather resistance, high temperature resistance and anti-UV performance. At the same time it works as an anti-static material that helps to gather less dust on surface.

 

Performance Indicators

Performance

Testing method

Unit

ASA线条

density

ASTM D 792

g/cm3

1.0

Melt index(220℃/10kg)

ASTM D 1238

g/10min

10-15

Tensile strength

ASTM D 638

Mpa

50

Elongation at break

ASTM D 638

%

30

Bending strength

ASTM D 790

Mpa

35

Bending modulus

ASTM D 790

Mpa

4300

Izod Notch impact strength

ASTM D 256

KJ/m2

19

Distortion temperature(0.46Mpa)

ASTM D 648

105

 

Printing parameters

  1. Best print temperature: 220-260℃
  2. Bed temperature: 70-110℃
  3. Feed rate: 20-90mm/s
  4. Idling speed: 90-150mm/s

 

Printing notices

1. Leveling printing plate before starting;

2. Heat the hot bed to 70~110℃ before printing, paste transparent golden polyimide high temperature resistance tape to the surface and keep it clean;

3. Keep a optimum distance between nozzle and plate (which allows you to paint out a flat line while moving your nozzles; if too far the line will be much mellow and too close will be hard to let filament out);

4. A lower filling rate can print finer articles (about 20%~ 30% degrees);

5. Nozzle diameter should be bigger than layer thickness. Try parameter like 0.2, 0.25, and 0.3;

6. Better keep cooling fan off when printing and print in a closed area. Putting flapper around printer also helps to keep constant temperature environment.

PS: eASA has weak tear resistance, please try to avoid drag or twine; it’s also suggested to apply glue to plate to help it stick.

 

Application area

  With weather resistance, high temperature resistance, anti-static and anti-UV performance, eASA can be applied in car, gardening, electronic, architecture, furnishing and other areas.

 

 

 

Facebook Twitter Instagram alibaba