More Innovations Coming


Products & Services

eBamboo filament

eSUN eBamboo 3D filament

Product Description :

Instruction Application

About eBamboo

  1. eBamboo has a matte, frosted texture, good melt fluidity, no stripping and can print smoothly;
  2. It has wood texture and wood aroma;
  3. Renewable, pest control, long life, very green and can be sprayed.
  4. It's suggested not to pause for too long and remove prints from the nozzle as soon as possible, or the wood powder will expand and burn.

Performance Indicators

Performance

Testing method

Unit

eBamboo

density

ASTM D 792

g/cm3

1.2

Melt index(220℃/10kg)

ASTM D 1238

g/10min

10-18

Tensile strength

ASTM D 638

Mpa

28

Elongation at break

ASTM D 638

%

3-7

Bending strength

ASTM D 790

Mpa

35

Bending modulus

ASTM D 790

Mpa

2000

Izod Notch impact strength

ASTM D 256

KJ/m2

10

Distortion temperature(0.46Mpa)

ASTM D 648

48

 

Printing parameters

  1. Best print temperature: 200-220℃
  2. Bed temperature: 25-70℃
  3. Feed rate: 20-90mm/s
  4. Idling speed: 90-150mm/s

 

Printing notices

1. Leveling printing plate before starting;

2. Heat the hot bed to 25~70℃ before printing, paste transparent golden polyimide high temperature resistance tape to the surface and keep it clean;

3. Keep a optimum distance between nozzle and plate (which allows you to paint out a flat line while moving your nozzles; if too far the line will print out extremely thin lines and too close will be hard to let filament out);

4. A lower filling rate can remit shrinkage crack during printing process;

5. Nozzle diameter should be bigger than layer thickness. Try parameter like 0.2, 0.25, and 0.3;

6. Better keep cooling fan off when printing and print in a closed area. Putting flapper around printer also helps to keep constant temperature environment.

PS: eASA has higher filling rate, please try to avoid drag or twine regarding of its brittleness; it's also suggested to dry the filaments before using because it can be affected easily with damp once open.

Facebook Twitter Instagram alibaba
Facebook Twitter Instagram alibaba