- Filaments
- PLA+
- PLA Transparent
- ePLA
- ePLA-ST
- ePLA-LW
- PLA Luminous-Rainbow
- eStars-PLA
- Re-filament
- eSUN 4D Filament e4D-1
- Respool
- PETG
- ABS
- ABS+
- ABS Odorless
- eSilk-PLA
- eTwinkling
- eMarble
- WOOD
- eTPU-95A
- eLastic(TPE-85A)
- eFlex(TPU-87A)
- PVA
- ePVA+
- eASA
- ePA
- ePC
- ePA12
- ePA-CF
- ePA12-CF
- ePAHT-CF
- ePEEK Pro
- eABS Max
- HIPS
- eCleaning
- eMate-PCL
- DuPont™ Filament
- Resins
- Accessories
- Printers
- 3D Pens
PLA+
PLA+ filament__Bone White
Product Description :
Best print temperature: 205~225℃
Base temperature: No Heat/（60-80）℃
Specification：
- 1.75mm
- 2.85mm
Characteristics：
The product is modified based on PLA material, easy to print , in addition ,it improves the toughness and layer adhereance..PLA+ is an environment-friendly material, which is easy to print and has smooth surface.Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing;Approved by FDA, safer to use;Can be used for conceptual model, rapid prototyping.
Packing：
- 1kg /spool,10 Spools/ctn
- 3kg /spool,4 Spools/ctn
Comparison of physical performance indicators：
|
Project |
PLA |
PLA+ |
|
|
Appearance |
white |
white |
white |
|
Tensile Strength |
78Mpa |
63Mpa |
34.3Mpa |
|
Elongation at break |
14% |
20% |
90% |
|
Bending strength |
90Mpa |
74Mpa |
43Mpa |
|
Flexural modulus |
1984Mpa |
1934Mpa |
1477Mpa |
|
Notch impact |
5.6 |
9 |
63 |
Print performance comparison：
|
PLA |
PLA+ |
ePLA-ST |
Conclusion |
|
|
Surface finish |
Normal |
No obvious layering |
No obvious layering |
ePLA-ST≈PLA+>PLA |
|
Hole column fitting model (The smaller the value, the better) |
0.3mm |
0.3mm |
0.3mm |
ePLA-ST=PLA+=PLA |
|
Hanging model (The larger the value, the better) |
<45° |
<60° |
<70° |
ePLA-ST>PLA+>PLA |
|
Suspension bridge (The larger the value, the better) |
40mm |
50mm |
50mm |
ePLA-ST=PLA+>PLA |
Note: Printing test conditions: nozzle 215℃; bed 45℃; speed 40mm/s
