- PLA Transparent
- PLA Luminous-Rainbow
- eSUN 4D Filament e4D-1
- ABS Odorless
- ePEEK Pro
- eABS Max
- DuPont™ Filament
- 3D Pens
ePA12 is a product developed based on PA12; low water absorption rate, the size of the printed parts is less affected by humidity and temperature.
ePA12 has high toughness and high impact resistance, and can be used to print durable parts;
Up to 165% elongation at break and excellent fatigue resistance;
Self-lubricating and wear-resistant performance, can print mechanical gears;
High-temperature resistance, heat distortion temperature of 100℃, can be used for temperature resistant parts;
Low shrinkage, not easy to warp and crack during printing.
Selling points: low moisture absorption; heat resistance; high toughness; high impact resistance; abrasion resistance; high dimensional stability; excellent printability.
|Filament Properties Table|
|3D PRINTING FILAMENT||ePA12|
|Heat Distortion Temp(℃,0.45MPa)||100
|Melt Flow Index(g/10min)||55.64(270℃/2.16kg)|
|Elongation at Break(%)||165.41
|IZOD Impact Strength(kJ/㎡)||10.14
|Extruder Temperature(℃)||260 - 290℃
|Bed temperature(℃)||70 - 90°C|
|Printing Speed||40 - 100mm/s|
|Heated Bed||必备 Required|
|Recommended Build Surfaces||固体胶，PEI|
|Heated Bed Not Required||√|
|Print Recommend||Drying 70℃/>12h|
Note: ePA12 needs to be dried (70℃/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.