- PLA Transparent
- PLA Luminous-Rainbow
- eSUN 4D Filament e4D-1
- ABS Odorless
- ePEEK Pro
- eABS Max
- DuPont™ Filament
- 3D Pens
ePLA-Gloss is a cost-effective PLA material that is environmentally friendly and easy to print.
Compared with ABS, ePLA has higher rigidity and PC-like strength, and does not require a closed cavity, low shrinkage, no warping, no cracking, and can print large-size models
Compared with other materials, the support is easier to peel from the surface of the model, and the surface of the contact surface is smooth and flat;
No irritating odor during printing, safe and environmentally friendly.
The wire reel is made by reusing injection molding based on PETG, ABS, PLA and other production waste and industrial waste. The outer box is made of recyclable cartons. The environmental protection concept makes 3D printing more sustainable;
Glossy surface effect, smooth surface; the lines are not easy to be broken, and the printing is smooth for a long time without clogging. It can be used for early concept models and rapid prototyping.
Selling points: green; cost-effective; high-speed printing; easy to peel support; excellent printability; lines are not easy to brittle; bright surface effect.
|Filament Properties Table|
|3D PRINTING FILAMENT||ePLA|
|Heat Distortion Temp(℃,0.45MPa)||56.70
|Melt Flow Index(g/10min)||3.3(190℃/2.16kg)|
|Elongation at Break(%)||31.54
|IZOD Impact Strength(kJ/㎡)||7.9
|Extruder Temperature(℃)||190 - 230℃
|Printing Speed||40 - 100mm/s|
|Heated Bed||可选 Optional|
|Recommended Build Surfaces||美纹纸，PVP固体胶，PEI